Chat with us, powered by LiveChat

Schluter DITRA-SOUND Mat

Stock Code: 5727
Out of Stock
£13.77
13

Found a lower price elsewhere?

Yes
Request Quote

Add items to your cart to request a quote

A thick bonded impact sound insulation product made of heavy polyethylene mat for tile coverings.
  • Fleece fabric laminated on both sides for bonding with the tile adhesive =
  • Reduces the impact sound of floor constructions by 13 DB
  • Direct Load Transfer - Can bear loads up to max Kn/m2
  • Only 3.5mm thick
  • Joint Tape & Edge strip prevents the formation of sound bridges
This product is temporarily out of stock.
Need Help with a Project?
Request a Quote

Add items to your cart to request a quote

Request a quote for a project
Contact our regional sales staff.
Enquire Now
Enquire team member by location

Details

  • The mat is embedded in a thin-bed mortar that matches the requirements of the substrate, with the fleece mechanically anchoring in the adhesive layer.  The tile covering is then installed directly over the DITRA SOUND using a thin bed method
  • Fleece fabric laminated on both sides for bonding with the tile adhesive
  • Only 3.5mm thick.  Reduces the impact sound of floor constructions by 13 dB (test values according to DIN EN ISO 140-8, BS EN ISO 140-8)
  • Direct Load Transfer – Can bear loads up to max Kn/m2.
  • Impact sound insulation - The heavy mat material absorbs much of the impact sound created by walking, for example, and reduces the drum roll effect. The insulation panel, therefore, is ideally suited for renovation and refurbishment projects in buildings, but also for new construction projects
  • Crack bridging - This can be used to bridge cracks, which are not expected to widen significantly or show height displacement. This ensures that cracks in the substrate are not transferred to the tile covering. If applicable, it may be necessary to install a feature to prevent height displacement
  • Load distribution (load transfer) - A heavy mat that cannot be compressed. Accordingly, tile coverings installed over Schluter®-DITRA-SOUND are highly durable. If high traffic loads are expected (maximum 5 kN/ m² e.g. in commercial applications), the tiles must be sufficiently thick and pressure stabilised for the corresponding application area. In areas with high traffic loads, it is particularly important that the tiles are fully embedded in the tile adhesive. As a rule, the impact of hard objects must be avoided on all ceramic coverings. Tiles should at least have a dimension of 5 x 5 cm.

Frequently Asked Questions

There are no FAQs for this product. Click ask a question to ask your question.
Ask a Question

Customer Reviews

Product Enquiry

Enquire team member by location
Please enter your address to get your closest sales representative
loading

Complete the form below to raise an enquiry with about Schluter DITRA-SOUND Mat:

Search engine powered by ElasticSuite